Season's Greetings: A Beaded Christmas Card with a Brick Stitch Tree

0 comments  •   7 minute read

Red Season's Greetings card decorated with a brick stitch seed bead Christmas tree and tiny beaded gift boxes

A small brick-stitch Christmas tree and a pile of square-stitch presents turn a plain card blank into something people keep long after the holidays. The tree is worked in 10/0 seed beads; the gifts are tiny squares of 11/0s, each tied with a beaded bow.

Kerrie Slade designed this card for Preciosa Ornela in their PermaLux colors, which hold their color well with handling. You'll make the tree first, then the gifts, then glue everything to the card. Bead sizes are given in aught (10/0, 11/0). All other measurements are imperial with metric in parentheses.

Red Christmas card with a beaded green tree with red ornaments and five small beaded gift boxes, next to a second kraft-paper card

Project card

Difficulty ●●○ intermediate
Technique 2- and 3-drop brick stitch, square stitch
Beads Three 10/0 colors, eight 11/0 colors
Finished Fits a card about 6 × 4.25 in (15 × 11 cm)
Colors  PermaLux
Download PDF

One button adds all eleven bead colors, FireLine thread, beading needles and glue. Bring your own card blank and a greetings sticker or metallic pen.

Materials & Tools

From our shelves

From your desk drawer

  • Card blank, about 6 × 4.25 in (15 × 11 cm), in red or kraft
  • Peel-off "Season's Greetings" sticker or a gold or silver metallic pen
  • Small sharp scissors
Tools: red and kraft card blanks, a gold greetings sticker sheet, scissors, beading needle, thread and a metallic pen
Card blanks, sticker, thread, needle and pen

Each color needs only 1 g, except the tree green (3 g), so one pack of each makes several cards.

The Palette

The tree is a single green with red ornaments, and the presents are where the color comes in: gold, apricot, lavender, violet, purple and blue, each box in two shades. Keep the gifts bright and varied so they read as a scattered pile, not a matching set.

Christmas Card: PermaLux tree and gifts

Sea Green and Red for the tree, then bright gold, apricot, violet and blue for the pile of presents.

Open this palette in the Color Studio

In the Color Studio you can try other gift colors against the tree green and add your version to the cart.

Pattern Notes

The tree is built from the top point down in brick stitch: two beads per stack ("2-drop") for the first rows, then three beads per stack ("3-drop") as it widens, so the tree gets bigger faster. The gifts are small rectangles of square stitch. In the diagrams, beads with a black outline are the ones you're adding in that step.

Key Our bead Preciosa color Amount
R10A Sea Green 10/0 22017 emerald green 3 g
R10B Brown 10/0 22007 brown 1 g
R10C Red 10/0 22008 wildberry red 1 g
R11A Yellow Brown 11/0 22003 mocca beige 1 g
R11B Dark Yellow 11/0 22002 sunflower yellow 1 g
R11C Lavender 11/0 22014 violet 1 g
R11D Apricot 11/0 22005 light salmon 1 g
R11E Red 11/0 22008 wildberry red 1 g
R11F Purple 11/0 22013 lilac 1 g
R11G Dark Violet 11/0 22015 dark violet 1 g
R11H Blue 11/0 22021 blue 1 g

Preciosa's color names differ from ours in places: their "violet" (22014) is our Lavender, and their "lilac" (22013) is our Purple. The trunk uses our Brown Matte while the shiny PermaLux Brown 10/0 is restocked.

Step-by-Step

The tree

  1. Start the top. Thread your needle with about 6.5 ft (2 m) of thread and pick up 4 Sea Green 10/0s. Leaving a 6 in (15 cm) tail, pass back through the first 2 beads so the two pairs sit side by side as two stacks. Then pass through the second pair, pick up 1 bead, and pass down through the first pair: that single bead is the tip of the tree.
    Two stacks of two green beads side by side
    1
    A single green bead added below the two stacks as the tree point
    2
  2. Work 2-drop brick stitch. Pick up 4 beads, pass under the thread bridge on top of the stacks from step 1, and back through the last 2 beads. Finish the row by picking up 2 beads, passing under the same bridge and back up through them. Every new row starts with 4 beads picked up together, and the rest are added 2 at a time; add 4 beads to the first and last bridges and 2 to each bridge between.
    Two new stacks of green beads above the first row
    3a
    Row finished with three stacks
    3b
  3. Keep widening. Following the diagrams, work 4 more rows in 2-drop brick stitch (2 rows per diagram). Pull the thread firmly as you go so the stacks sit in neat lines with no gaps.
    Two-drop brick stitch row with four stacks
    4a
    Tree triangle after several two-drop rows
    4b
    Tree after the next two rows
    5
  4. Switch to 3-drop. Now pick up 6 beads, pass under the last thread bridge of the previous row and back through the last 3 beads just added. Add 3 beads to each remaining bridge, with two sets of 3 on the final bridge. Work 6 more rows the same way: 6 beads to start each row, then 3 at a time, with 6 on the first and last bridges.
    First row of three-drop brick stitch along the top of the tree
    6
    The full tree triangle in green
    7
  5. Add the trunk. Weave to the starting position shown, pick up 6 Brown 10/0s and pass down and up through the tree stacks so the brown forms two stacks of 3 side by side. Add a second pair of brown stacks, then stitch the four trunk stacks together.
    First brown trunk stack stitched onto the base of the tree
    8a
    Four brown trunk stacks
    8c
    Trunk stacks joined together
    8e
  6. Hang the ornaments. Turn the tree so the trunk is at the bottom. Weave to a green bead in the middle of the tree, pick up 1 Red 10/0, and pass through the next 5 green beads so the red bead sits between two stacks like an ornament. Continue around the tree, adding red beads wherever they look good. Tie off and trim both threads.
    First red ornament bead added between green stacks
    9a
    Three red ornaments added
    9c
    Finished beaded tree with red ornaments and a brown trunk
    the finished tree

The gifts

  1. Start the striped gift. Thread about 26 in (65 cm) of thread and pick up 8 Yellow Brown 11/0s; this is the first row. Leaving an 8 in (20 cm) tail, work square stitch: pick up 2 Dark Yellow, pass through the last 2 beads of the first row and back through the 2 new beads. Then add 1 Dark Yellow at a time, each one stitched to the bead above it, until the row is complete.
    Row of eight gold beads with the first two yellow beads square-stitched below
    10a
    Two complete square-stitch rows, gold above yellow
    10d
  2. Add the stripes. Work the next row in Yellow Brown the same way, then a row of Dark Yellow and a final row of Yellow Brown, so the stripes alternate.
    Starting a third row of gold beads
    11a
    Three square-stitch rows of alternating gold and yellow
    11d
  3. Tie the bow. Using the tail thread, pick up 3 Lavender 11/0s and pass through the 3 beads at the end of the top row, so the three beads arch like a bow. Tie off and trim both threads.
    Diagram of three lavender beads forming a bow on top of the striped gift
    13
    Finished striped gift with a lavender bow
    the striped gift
  4. Make the checked gift. Thread about 22 in (55 cm) of thread and pick up 5 beads in the order Yellow Brown, Apricot, Yellow Brown, Apricot, Yellow Brown. Leaving a 6 in (15 cm) tail, square-stitch the next row in the opposite colors (Apricot above Yellow Brown, and so on) so the colors alternate like a checkerboard. Work 2 more rows the same way.
    Five beads in alternating gold and apricot with the first two of the next row
    14a
    Two complete checked rows
    14c
    Four checked rows of gold and apricot
    15
  5. Add a cross bow. Weave to the bead shown, and add 4 Red 11/0s around the center bead so they form a small cross on the front of the gift. Pass through all four red beads again to firm them up, then tie off and trim.
    Diagram of four red beads forming a cross on the checked gift
    16b
    Finished checked gift with a red cross bow
    the checked gift
  6. Make three more gifts. Use the remaining colors to make three more presents, changing the number of beads per row and the number of rows so each one is a different size. Give each a bow from step 9 or a cross from step 11.
    Three more beaded gifts in purple, blue and lavender with contrasting bows
    the remaining gifts

Assemble the card

  1. Add the greeting. Put a peel-off greetings sticker at the top center of the card front, or write your own greeting with a metallic pen.
    Gold Season's Greetings sticker applied to a kraft card
    sticker
    Season's Greetings handwritten in gold pen on a red card
    or pen
  2. Glue it down. Arrange the tree and the gifts on the front, then fix them with glue, glue dots or double-sided tape. Press each piece flat while the glue sets.
    Beaded tree and gifts glued to a red card
    assembled
    Two finished cards, one kraft and one red
    the finished cards

Tips

  • Keep the tension firm in brick stitch. Loose stacks lean and leave gaps. Snug each stack against its neighbor before moving on.
  • Count the 3-drop rows. It's easy to lose track once the tree gets wide. Check your rows against Figure 7 before you start the trunk.
  • Make the gifts different sizes. A pile of presents looks natural when no two boxes match. Try 6, 7 and 8 beads across, with 3 to 5 rows.
  • Glue sparingly. A thin layer or a glue dot under each piece is enough. Too much glue seeps between the beads and dulls them.

Variations

  • Gift tags. Glue a single tree or one present to a folded tag for a quick gift tag.
  • An ornament. Back the tree with felt, stitch a loop of thread to the top and hang it on the tree.
  • Earrings or a brooch. Two small trees on ear wires, or one tree on a pin back, make an easy matching gift.
  • A snowy tree. Swap the red ornaments for white or silver beads for a winter-white version.

Make it yours

Pick your own gift colors in the free Color Studio: choose a bead, see what goes with it, and build a palette before you buy. The Pattern Studio can turn your palette into a bead pattern.

Open the Color Studio

Design credit: Preciosa Ornela / Kerrie Slade. Instructions and photos adapted for clarity for the Shipwreck Beads blog.

Previous Next

Leave a comment

Please note: comments must be approved before they are published.