Colorful Christmas Bauble: A Crocheted Seed Bead Ornament in PermaLux Confetti

0 comments  •   7 minute read

Crocheted seed bead Christmas baubles in white, gold and confetti colors with gold bows, among warm string lights

Bead crochet worked around a small ball makes a tree ornament that won't shatter. This bauble is covered in about 1,650 10/0 seed beads: crisp white panels, gold outlines, and diamonds of rainbow PermaLux confetti between them. All the color work comes from the stringing order, so once the beads are on the yarn, the crochet does the rest.

Alexandra Lysenko designed the Colorful Christmas Bauble for Preciosa Ornela. It's worked in joined rounds from the bottom, around a 1⅜–1⅝ in (3.5–4 cm) polystyrene ball or a ping-pong ball, and finished with a gold cap and a hanging loop. Bead sizes are given in aught (10/0). All other measurements are imperial with metric in parentheses.

Finished crocheted seed bead bauble: white panels and rainbow PermaLux diamonds outlined in gold, with a gold cap

Project card

Difficulty ●●○ intermediate, patient
Technique Bead crochet in the round
Beads About 1,650 10/0s: white, gold and a PermaLux mix
Colors
Download PDF

One button adds the white and gold beads, seven PermaLux colors for the confetti mix, a gold eye pin, a gold bead cap and big eye needles. Bring your own crochet yarn, hook and ball (list below).

Materials & Tools

From our shelves

From your craft drawer

  • Polystyrene ball, 1⅜–1⅝ in (3.5–4 cm), or a ping-pong ball
  • Crochet yarn in white or light grey, fine enough for a 10/0 to slide over it
  • Steel crochet hook, 1 mm (about US 12)
  • Scissors, plus ribbon or cord for hanging
  • Small slips of paper for marking rows while you string
Tools: a white polystyrene ball, scissors, a spool of white crochet yarn, a crochet hook, an eye pin and a gold cap
The ball, yarn, hook, eye pin and cap

The Palette

Three ingredients: a bright white for calm, gold to draw the outlines, and a confetti mix that does all the shouting. Pearl White stands in for Preciosa's original "white sphinx," which has the same soft sheen. PermaLux colors are coated to hold up to handling, which matters on an ornament that comes out of the box every year.

Christmas Bauble: white, gold and confetti

Pearl White panels, gold outlines and a PermaLux confetti mix. Add Orange, Violet and Light Pink for the full rainbow.

Open this palette in the Color Studio

In the Color Studio you can swap the white or the gold for any bead we have in stock and see the new combination before you buy.

Pattern Notes

The bauble is worked in six wedge-shaped sectors, like the panels of a beach ball. Each round adds one bead to every sector until the ball is widest, holds there, then drops one bead per sector until it closes. Every bead is strung onto the yarn before you crochet, in the order the chart shows, so the white, gold and confetti land exactly where they should.

Key Bead Approx. count
a Pearl White 10/0 (Preciosa 46102 white sphinx in the original) 825
b Silver-Lined Topaz 10/0 (Preciosa 17050 gold) 204
c PermaLux confetti mix 10/0 621
Bauble pattern chart: white and grey diamonds with black confetti diamonds outlined in yellow gold
Chart 1a. White = a, yellow = b (gold), black = c (confetti mix). Grey squares are gaps, not beads. The PDF also gives the full stringing order as a counted list (1b).
Rounds Beads per round What happens
1–10 6, 12, 18 … 60 Add one bead to each sector every round
11–25 66 No increases: 11 beads per sector, the widest part of the ball
26–35 60, 54, 48 … 6 Drop one bead from each sector every round
Top 5 rounds on 6 gold beads A short gold tube that holds the cap

Stitch names: Preciosa's translation says "double crochet," which is the UK term. In US terms every stitch here is a single crochet.

Step-by-Step

  1. String everything first. Using the big eye needle, string 30 gold beads first. They come off last and form the little tube at the top. Then string the rest in chart order, following the arrow on chart 1a or the counted list in the PDF (1b). Skip the grey squares; every black square is one bead from your confetti mix, picked at random. Slip a scrap of paper between rows as you go so you can find your place if you lose count.
    All the beads strung onto the crochet yarn and coiled in a spiral beside the spool
    1c · all strung
  2. Start the bottom. Make a slip knot and chain 2 without beads. Work 6 single crochets into the first chain to make a small ring. The photos use dark yarn and bigger beads so the stitches are easy to see.
    Slip knot on the crochet hook
    2a
    Six single crochets worked into a small ring
    2c · the starting ring
  3. Round 1: six beads. Insert the hook under both threads of the next stitch, slide one bead up, and work a single crochet so the bead sits on the outside. Then work one plain single crochet into the same stitch. Repeat all the way around: six beads, each followed by an empty loop. Those empty loops mark the six points where every new bead will be added.
    Beads slid up the yarn toward the starting ring
    3a
    Round 1 finished with six beads around the ring
    3g · six beads
  4. Round 2: twelve beads. Work a bead stitch into each bead stitch of the round below until you reach an empty loop. In that empty loop, work one bead stitch and then one plain stitch. Repeat around: each of the six sectors now has two beads, and a fresh empty loop sits at every point.
    Next beads slid up the yarn while working round 2
    4a
    Round 2 finished with twelve beads
    4g · twelve beads
  5. Rounds 3–10: build the sectors. Keep going the same way. Every round, the empty loop at each point gets one bead stitch plus a new empty loop, so each sector gains one bead. After round 10 you have 60 beads around, and the six sectors show clearly as white, gold and confetti wedges.
    An early round with white, gold and colored beads around the edge
    5a
    Front of the work showing six wedges forming
    5d · sectors forming
    Round 10 complete: a flat disc of six white and confetti wedges outlined in gold
    5f · 60 beads
  6. Round 11: stop increasing. Work one bead stitch into every loop, including the empty ones at the points, and don't add any new empty loops. Each sector now has 11 beads, 66 in all. From here the sides start to rise.
    Inside of the work after round 11, the edge starting to turn up
    6b · 66 beads
  7. Rounds 12–25, then close it up. Work 14 more rounds of 66 beads. The piece turns into a little bowl; slip the ball inside once it's deep enough to hold it. To decrease, skip the first stitch of each sector in a round, which takes the count down by six (60). Keep doing that every round, 54, 48 and so on, until only 6 beads are left at the top.
    The beaded bowl after the straight rounds
    7a · the bowl
    The white ball placed inside the beaded bowl
    7b · ball in
    Decrease rounds drawing the beadwork over the top of the ball
    7f · decreasing
    Ball almost fully covered, six beads left at the top
    7h · six left
  8. Crochet the gold tube. On the last six stitches, work five rounds of bead slip stitches with the 30 gold beads you strung first. This makes a short gold collar for the cap to sit on.
    Gold beads being worked into a tube at the top of the ball
    8a
    Finished gold tube at the top of the bauble
    8c · the gold collar
  9. Fit the cap. Push the eye pin into the tube eye-first. Thread the remaining yarn onto a needle, sew the opening closed around the pin, knot and trim. Slide the bead cap and one decorative bead onto the pin, then turn a loop with round-nose pliers. Thread a ribbon or cord through the loop to hang it, and add a bow if you like.
    Gold eye pin pushed eye-first into the bead tube
    9a · eye pin in
    Gold cap and a bead threaded onto the eye pin
    9c · cap on
    Loop turned at the top of the eye pin above the gold cap
    9d · hanging loop
    Finished bauble standing upright
    9e · finished

Tips

  • Check the stringing twice. A wrong bead near the start of the strand can't be fixed without cutting the yarn. Tick off each row of the chart as you string it, and use the paper slips.
  • Mix the confetti well. Pour all seven PermaLux colors into one dish and stir before you start, so no color clumps in one diamond.
  • Size the ball to your tension. If the bowl is loose around a 1⅜ in (3.5 cm) ball, switch to a 1⅝ in (4 cm) ball. A ball that's too small leaves slack beadwork; one that's too big stretches the gold lines.
  • Count at the points. At the end of every increase round, check that each sector has the same number of beads. It's much easier to fix a missed stitch one round later than ten rounds later.

Variations

  • Red and gold. Replace the confetti mix with PermaLux Red for a classic Christmas bauble.
  • Winter blues. Use Light Blue and Dark Turquoise as the mix, with the white and gold unchanged.
  • Swap the outline. Silver-lined crystal instead of gold makes a frosty, wintry version. Match the eye pin and cap to the outline color.
  • A set of three. The PDF's cover also shows zigzag and diamond versions. The pattern isn't included, but the sectors make it easy to chart your own: keep the bead counts per round and change only which beads go where.

Make it yours

Build your own confetti mix in the free Color Studio: pick a bead, see what goes with it, and preview the colors together before you buy. When you have a palette you like, the Pattern Studio turns it into a bead pattern.

Open the Color Studio

Design credit: Preciosa Ornela / Alexandra Lysenko. Instructions and photos adapted for clarity for the Shipwreck Beads blog.

Previous Next

Leave a comment

Please note: comments must be approved before they are published.